F-15

The Laser Cut

F-15 Eagle

Twin 480 minifan
Wingspan: 36"
Fuse: 46"
Laser etched formers
for easy identification
Laser cut formers
Flaps
Molded intakes
Molded nose cone
molded thrust nozzles
Bungee Launch and or
retracts/ fixed gear

this material has a copy right !

Full kit illustrated

Option #1) Basic Kit will include a molded nose cone, intake lips,servo fareings,
canopy, intake ducting,Thrust tube material and exhaust nozzles along with balsa
and lite Ply formers, stringers and spars of balsa and hardwood, hardware for
basic frame up,full size plans, and a power point photo build CD (120 pages) .
Option #2 : all of the above and full sheeting.
What you will need in addition to the kit
1) pushrods, clevises, control horns, hinges
2) 3/4 oz. fiberglass cloth ( I highly recomend this method of finishing ,as it
provides tremendous torsional strength to the model over all).
3) poly poxy resin kit- available from -Spruce Aircraft Supply
4) spray primer and paint
5) two 60 amp brushless speed controls (Castle Creations Phoenix series work
well)
6) a parralel harness (Radical RC can make these for you, as well as supply the
battery packs - Great People and prices to boot !
7) four 15 - 18gr servos
8) four 12" servo extensions and two Y harnesses.
9)two Wemotec 480 minifans - We stock these !
Powering options:
Our 15 is being bungee launched running two Arc 47-28-1s on two 3s 3300 mah
22c packs (in Parrelel), . You will want motors in the KV range of 5K . AUW
Ready to fly weight will be about 4 1/2 LB !!!